Please leave your Email. We will find the best price for this product and contact you shortly!

AIM Advanced Installation Signal Meter for DIRECTV Satellite Dishes

Average Customer Rating:
4.7 (Based on 57 reviews)
  • Price:$485.30 & FREE Shipping
  • Availability:Usually ships in 24 hours
Product Description
  • Run EIV at any location within installation
  • Tune any DIRECTV National or Spot beam transponder in zip code (Sat Tune)
  • Report power, Es/No, LNB freq. offset and lock status
  • Measure Cable Resistance (Cable Resistance Test)
  • Log Test Results, Power supplies for 13/18V (LNB and MS) and 21V for SL3S and SL5S
The AIM was developed by DIRECTV®, Trilithic and Indesign to provide customized features for installing and troubleshooting DIRECTV® satellite receiver systems. The AIM is a rugged meter suitable for both indoor and outdoor use. The Aim is the a DIRECTV Specific satellite installation meter, that tunes to ANY DIRECTV Transponder - national and local spot beams.Powers all LNBS including SL3 SWM and SL5 SWM. The AIMs large display and keypad make it easy to navigate to the many features of the meter. On-screen directions guide the technician through ODU installation, extended installation verification, and other troubleshooting tests. A USB port is provided to transfer data from the AIM to a flash drive, and for upgrading the AIM firmware. Extended Installation Verification (EIV) EIV can be performed right after ODU alignment while the technician is on the roof to quickly confirm that pointing is satisfactory. This gives the installer confidence that IRDs isntalledi n the home will pass IV. EIV can also be used as troubleshooting tool to pinpoint problems anywhere within a distribution network. Troubleshooting Several additional troubleshooting features can be used to quickly identify fault equipment in an installation. the AIM Allows testing of individual cable runs in the distribution network, tuning to any DIRECTV satellite transponder, testing communications between the SWiM and the IRD, measuring in-line voltage, current and tone, and performing a complete transponder survey. Frequency Range 250-2150 MHz Signal Level Range -10 to -69 dBm RF Input Connector Replaceable F Connector (2) Input Inpedence 75 OHM LNB Power Supply 13 Volts/ 18 Volts SWiM LNB Power Supply 21 Volts Communications USB flash drive Battery 8 - cel, 9.6 Volts, 3.8 AH rechargeable NiMH Operating Temperature -20° to + 125°F (-28.9° to + 51.7° C) Storage Temperature -40° to + 150° F (4.4° to 37.8° C) Battery Charging Temp. 40° to 100° F
Learn what other customers say about this product Read more
-
Stay Connected: